PSP 608 MultiDelay 1.0 review
DownloadPSP 608 MD is perhaps the most fully featured delay plug-in available on the market (VST, AudioUnit, RTAS and HTDM for Mac OSX and VST, DirectX and RTAS format for PC).
|
|
PSP 608 MD is perhaps the most fully featured delay plug-in available on the market (VST, AudioUnit, RTAS and HTDM for Mac OSX and VST, DirectX and RTAS format for PC). We have striven to offer you a creative tool that is not only functional, but inspiring.
Each tap has selectable feedback, stereo image and position, delay time, multimode filter, modulation, drive/tape saturation, and reverb. Moreover, the feedback and drive can be placed at the beginning or end of the signal chain for even more sound design options!
The modulation section consists of both an LFO and Envelope follower, and the tape saturation algorithm is taken from our renowned mastering processors.
And of course all this can be done at any bit depth and sample rate up to 24-bit, 192kHz, and be fully automated via MIDI and any host sequencer.
Here are some key features of "PSP 608 MultiDelay":
Up to 8 seconds of delay time per channel
Continuous control over the delay time in milliseconds and/or chosen quantize note
Two operation modes: Multidelay, in which each tap has its own feedback buffer; and Multitap, in which the Master Feedback operates on one (user selectable) tap
Each tap included independent adjustment of the following: gain, stereo field width and balance, delay time, filtering, modulation, saturation simulation and reverberation
Each tap can choose between multiple quadruple biquadratic filter types, including: Low Pass, Band Pass, High Pass, PEAK filter and four Shelf filters
Modulation section (LFO and envelope follower) offer adjustable modulation depth of ± 3 octaves, and can be selected for filter cutoff
Tape saturation simulation with adjustable gain based on the algorithm used in our mastering processors
Filtering module in feedback includes LP, BP, HP filter (either State Variable Filter or Biquad) with adjustable cutoff and resonance
Vintage reverberation module for faithful simulation of spring and plate reverbs
Support for sample rates of up to 192kHz
Host and MIDI automation of all processing.
Limitations:
Every 15 seconds, the delay functionality is turned off for 5 seconds
MIDI Control is disabled
Saving of MIDI assignments is disabled
Loading of MIDI assignments is disabled
Individual Preset Save and Load is disabled
Preset Bank Save and Load is.
Requirements:
Panther MacOS X v 10.3.5 or later / Tiger MacOS X 10.4.0 or later
G4 400 Mhz
512 MB RAM
AudioUnit or VST compatible host application
ProTools TDM 6.4 or later for HTDM and RTAS version only!!!
iLok for HTDM version only!!!
PACE InterLok Mac OSX extenstions 5.2 or later for HTDM only!!!
PSP 608 MultiDelay 1.0 search tags